5 easy steps

What you need

For hanging your print you need: mountings, drilling machine (or hammer), spirit level and a pencil.

1. Attach mountings

The mountings have to be glued or screwed on the photo. (Check the attached manual!)

2. Mark drilling holes

Mark the drilling holes and use a spirit level.

3. Drill holes

Drill the holes at the marked spots on the wall and attach the mountings.

4. Hang print

Now just hang the print on the fixings in the wall.

5. Hooray!

Congratulations: If you still got all you fingers you can give yourself a well deserved High Five.

TIP: For an Acrylic Print with 3 mm thick glass and sizes up to 80 x 60 cm, you don't have to drill holes. You just need 2 nails and our COUPLE hanging kit - and maybe a hammer.

Things to keep in mind when hanging Acrylic and Metal Prints

Eye level Metal and acrylic prints are presented best at eye level.

Avoid direct sunlight – The sun may cause color fading in the long run.

Use gloves – Avoid nasty finger prints while hanging your print.

Suitable for outdoors – Metal and acrylic prints can be hung outside but avoid direct "weather hits".